- ** Best-in-class Long Range ** The VTech BM1000 Audio Baby Monitor's dependable long operation range covers up to 300 metres, lets you go about your day and stays connected with your baby from another room or even from the yard..
- Digital DECT Technology offering interference free, high quality, wireless security with increased range..
- ** Easy Set-up Plug & Play ** Simply connecting power for both units and allow 1-min for the units to link to each other..
- ** Easy to Use ** The speaker volume on the parent unit is easily controlled by pressing the up or down arrow keys. When the parent unit is in mute, the visual sound indicator will still indicate the sound detected from the baby unit..
- ** 5-level Sound Indicator ** A set of five LED lights on the parent unit indicates the level of sound in your baby's room so you can visually monitor noise level with the receiver muted..
- ** Sound Alerts ** The parent unit emits different alert tones for situations needed your attention: Low battery or Out of range, etc..
- ** Included 2 AAA rechargeable batteries.
Product Description
-------------------
Peace of mind; anywhere, anytime. From anywhere in the home,
hear all the special sounds your baby is making. DECT digital
technology provides crystal clear transmission, eliminating any
annoying white noise your hear from analogue monitors. The only
sounds your hear are coming from your baby. With extended range,
you can carry the parent unit with you everywhere you go, even
out into your garden using the useful belt clip. For times your
need added peace, turn the sound down on the parent unit and rely
on the visual sound alert lights to indicate sound levels in your
baby’s room. DECT digital technology for a secure connection and
clear sound without interference. Baby unit operates on mains
power (adaptor included) Parent unit uses rechargeable batteries
for up to 14 hours of active monitoring before recharging
(batteries and mains adaptor for parent unit included) Long 300m
range. Includes audio and visual sound indicators. 5 volume
levels and volume off settings to suit your needs. Low battery
and out of range sound alerts on parent unit. Baby unit power
light indicates whether it’s on or off. Includes useful belt
clip.
Box Contains
------------
Parent unitParent unit battery compartment cover2 batteries for
parent unitBaby Unit2 power adaptorsUser guide
Troubleshooting:
If you have difficulty with your audio monitor, please try the
suggestions below.
My audio monitor does not work at all:
Make sure the baby unit, parent unit and the batteries are
installed and charged correctly. For optimum daily performance,
charge the parent unit when it is not in use.
Make sure the power adaptors are securely plugged into the outlet
not controlled by a wall switch.
Make sure the adaptor cords are plugged firmly into the baby unit
and parent unit.
Make sure the baby unit and the parent unit are turned on.
The parent unit may be too far away from the baby unit. Move the
parent unit closer to the baby unit (but not less than 1.5
metres).
Unplug the electrical power to the baby unit and parent unit.
Wait for approximately 15 seconds, then plug it back in. Turn on
the baby unit and the parent unit. Allow up to one minute for the
baby unit and the parent unit to synchronise.
Charge the batteries in the parent unit for up to 12 hours.
If the parent unit batteries are completely depleted, they may
take up to 30 minutes to charge the parent unit before it can be
used for a short time.
Remove the batteries and then install them again. If that still
does not work, it may be necessary to purchase new batteries.
Large obstructions may impact the reception. Try to relocate the
baby unit, away from large obstructions such as walls and doors.
Other electronic products may cause interference with your audio
monitor. Try installing your audio monitor as far away from these
electronic devices as possible: wireless routers, radios,
cellular telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and cordless telephones.
The parent unit does not play any sound when there is noise from
the baby unit:
Make sure the parent unit is powered up by connecting it to mains
power or to the rechargeable batteries provided.
Make sure the parent unit is turned on and the speaker volume is
not set to off.
The parent unit may be too far away from the baby unit. Move the
parent unit closer to the baby unit (but not less than 1.5
metres).
If the parent unit is powered by the provided batteries, make
sure there is sufficient charge. Charge the battery in the parent
unit for up to 12 hours.
Large obstructions may impact the reception. Try to relocate the
baby unit, away from large obstructions such as walls and doors.
Remove the batteries and then install it again. Turn on the baby
unit and the parent unit. Allow up to one minute for the parent
unit and the baby unit to synchronise.
Other electronic products may cause interference with your audio
monitor. Try installing your audio monitor as far away from these
electronic devices as possible: wireless routers, radios,
cellular telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and cordless telephones.